Boost Your Network Performance: Essential Fast Ethernet Applications Explained

When you need network cables, especially Cat6 plenum ethernet cable the main purpose is to connect with LAN and WAN to pass the internet access to different devices. But there are other factors to use LAN cables like with Fast, Gigabit, and Future Ethernet Standards. Engage with this guide about Bulk Cat6 Plenum cable to learn more.

What is your main purpose to use ethernet cables — networking, entertainment, or gaming? Well, that is the user's choice but if I tell you that you can use the Cat6 Plenum Ethernet cable for multiple reasons, that sounds interesting.

So, I am sure you are aware of the technical speed standards like 100BASE-T, 1000BASE-T, and 10GBASE-T. These are speed standards for twisted pairs of cables. So what is Cat6 plenum cable capable of? 

Topology of Cat6 Ethernet Cable

Category 6 cable is the unsung hero in the network and is the next advanced invention after the successful experiment of the Cat5e Ethernet Cable. The main perspective of this cable is to have a better smoother networking experience. So what are the key features that make this bulk cat6 plenum cable better for fast browsing? There are a few main factors like

• Tight Twisted pairs to reduce the crosstalk

• Speed ratings of the cable will be explained in detail

• High Bandwidth 550 MHz

• Spline through a plastic material but valuable. 

• UTP and STP variant (Cat 6 shielded plenum cable)

• Longer cable runs

• Plenum fire resistive jacket to protect the internal and external cable structure.

 Let's discuss each of the attributes briefly to get a precise understanding of the Cat6 plenum cable. Starting from the twisted pair, the cat6 plenum has 5-6 twists per inch in each twisted pair to reduce the crosstalk. The tight twist halts the entry of electrical noise. So that maintains the signal strength throughout the cable length.

This is best when the cable is used for longer runs installation but on the other side, you cannot use UTP (Unshielded Twisted Pair) in a complex wiring structure as the only factor to stop signal interference in Bulk Cat6 Plenum Cable is tight twisted pairs. Rather you can use cat 6 shielded plenum cable for complex buildings.

Now there comes Speed ratings of Cat6 plenum 1000ft bulk cable. This cable is for both longer and shorter distances featuring different speed specs. For shorter lengths “164ft” the cable supports 10 Gbps speed ratings. But if the cable exceeds from 164ft to 328ft or less the speed of Cat6 plenum 1000ft drops to 1 Gbps. but still good from the previous cat5e cable.

Did You Know — The ideal installation length of an Ethernet Cable is 100 meters (328ft) to get the maximum input of the low voltage network cable like Bulk Cat6 Plenum. Do not exceed the cable length or else you will face slow speed or connection errors.

While Buying Ethernet Cable there are many things to keep in mind but the Wire Guage is important. It is said that the lower the wire gauge depicts the thickness of the cable conductor. For cat6 plenum 1000ft cable the American Wire Gauge is 23 AWG. It can be used for

• Fast Data Transmission

• Smooth signal transmission at longer runs

• Less signal attenuation 

• Flexibility 

Which Is More Secure To Use – UTP or STP?

This is hard to explain which is more secure for network cabling as both have their distinctive nature to use whereas Cat 6 shielded plenum cable is the special edition. There is a mild difference between the shielded and unshielded cables.

The UTP Bulk Cat6 Plenum is a general ethernet cable that is best known for its large bending radius which is 6.00 mm the original diameter (OD) of the cat6 plenum cable and inside bending radius is 2.4 cm and 1.00 inches respectively.

On the other hand, the cat 6 shielded plenum cable OD is 7.00 mm and the inside radius of the cable is 4.9 cm and 2.00 inches. Well, this idealizes the installation guide to bend the cable in sharp bends within the building.

As for Cat6 plenum shielded cables, there is an additional insulation layer to protect the cable. Two types of insulation layers are used within the cable jacket — Aluminum Foil and Braid Mess. Well, both work as a stronghold to restrict the entry of external interference. The internal structure of the shielded cable has

• Foil Shield or Braided Mess sheath

• Insulation jacket over the twisted pairs

• Drain wire (Used for Bonding)

• PE tape (Polyethylene Tape)

• Spline (Cross-skeleton plastic material)

• Plenum fire resistive jacket

Why Is Plenum An Expensive Jacket?

Whenever you plan to buy network cables, plenum cables are always expensive. Why is that so? The plenum jacket is a highly fire-resistant jacket with UV-resistant capacity which enables this cable to bear maximum temperature range.

The composition of plenum cable is FEP (Fluorinated Ethylene Polymers) which is a non-flammable jacket. The plenum jacket cable (Cat6 Plenum 1000ft) can be used in horizontal spaces where the environment is enriched with maximum oxygen and air supply so there are adequate chances of fire ignition and if it does it can be a catastrophic incident.

To overcome this issue many buildings have restrictions to install cable with fire safety ratings — Plenum. So when you plan to Buy an Ethernet Cable you should look at what type of jacket you want for your installation needs. 

How To Choose The Right Type Of Network Cable?

There is nothing special that you will do to Buying Quality Ethernet Cables, all you have to do is 

• First, look at the speed ratings of your server for gigabit speed and choose the Cat6 plenum cable. 

• Quality is a key point to futureproof the cabling

• Jacket ratings — Plenum or Riser

• Shielded or Unshielded according to the environment

• Length of the cable, if you need bulk cable go for a 1000ft cable 

What Do You Mean By Fast - Gigabit - 10 Gigabit Ethernet?

These are the speed standards for any ethernet cable and it's a technical language that the cable does meet all these speed standards. In 1980, IEEE (Institute of Electrical and Electronics Engineers) put up the standards for the ethernet cable.

• Ethernet IEEE 802.3 (10 Mbps)

• Fast Ethernet IEEE 802.3u (100 Mbps)

• Gigabit Ethernet IEEE 802.3z (1000 Mbps)

• Future Ethernet IEEE 802.3uz (10 and 40 Gbps)

These are the standards that define that the cable will be used for PoE, audio/video streaming, or other particular high-density applications. For PoE technology, the cat6 plenum cable is the best to use for providing power and signal in one go to the PoE-supported devices. It can be used for PoE/+/++ up to 60 - 90 watts. 

Final Thought

Cat6 plenum 1000ft cable bulk is used for industrial and commercial applications to secure fast networking. Upgrading to Cat6 Plenum cable is worth a step to futureproof the entire cabling structure. 

Make sure the cable has a pure copper conductor so that it will tackle the speed and heat dissipation while transmitting a high volume of data. A cat6 plenum 1000ft cable with copper conductor is the best combination for maximum safety and conductivity.