From Concept to Completion: The Pool Building Process Explained

Construction of the pool is not only an interesting and creative process that turns the territory of the backyard into a personal spa.

But, it is a very elaborate process in that it is divided into several sub-processes from the planning and preparation stage to the last stage of implementation.

By learning more about each phase, one can be able to avoid hitches and end up with a pool of his/her dream.

1. Initial Consultation and Planning

Pool construction thus starts with a feasibility meeting where you present your idea, how much money you are willing to spend and what you expect from the pool contractor.

In this phase, it involves the evaluation of the area that you want to construct the pool, learning your wish list of the swimming pool and the probable designs.

The builder will also double-check the local legal requirements and the zoning laws so that he or she does not contravene the law.

In this stage you will determine the physical appearance of the pool, the size, shape and depth of the pool, presence of features such as water falls, lighting and heating.

An initial design and the estimated cost for the project are then produced which gives the detail of what needs to be done and how much it will cost.

2. Design and Engineering

After the first phase in the process of making a design is adopted, there is a need to come up with a second phase where more intensive planning is done.

These are involving development of architectural plans and design models of the pool that the final project is expected to look like.

This means that the process of designing incorporates consideration of the structural design of the pool, the layout of the surrounding environment as well as other factors such as decking and landscaping.

Architects and engineers work closely so as to achieve both the architectural elegance and mechanical soundness of the pool facilities.

This stage also entails soil sampling, surveying to resolve issues involving the physical features of the ground or beneath the ground such as utility lines among others.

3. Obtaining Permits and Approvals

To embark of constructing, several approvals have to be availed by the local governments.

This step is very essential as it draws the Construction Faculty or local authority’s attention on the kind constructing the pool and how it meets the set building laws.

Normally this task lies with the pool builder, however, the homeowner should know which permits and approvals are desired or needed.

4. Excavation and Site Preparation

Demolition starts after obtaining necessary permits There are basically two steps; after acquiring the necessary permits, excavation takes place.

This involves outlining of the pool size/shape, and excavation of the ground to obtain the desired shape and depth of the pool.

Construction is one of the elemental phases where discoveries of improper soil type or water levels which may be anathema to the plan may be discovered.

Excavation is followed by preparation where a steel framework is laid down as the basis of the pool’s structure.

During this stage conduits for plumbing and electrical works are also incorporated into the structure to avail facilities for filtration heating and lightening.

5. Pool Shell Construction

With that completed, the subsequent logical procedure is the erection of the pool shell in the site which has already been prepared.

This is often done using more materials such as concrete; fiberglass or vinyl among others.

In the case of concrete pools, there are a process known as shotrete or gunite whereby concrete is sprayed on the steel reinforcing bars to form the outside shell of the pool.

Fiberglass pools are prepared and delivered to the site and then installed by being rolled into position while vinyl pools already come with a pre-fabricated liner that is fitted into a frame that has been built.

This will determine the look of the pool, durability as well as the frequency of maintenance that may be required from time to time.

6. Installation of Finishes and Features

Finishes and features are defined as the materials used on walls and ceilings such as tiles, paint, wall paper and the various elements such as handrails, doors, counters and cabinets fixed onto these surfaces.

After the shell is provided, wet finish of the pool is provided which forms the internal structure of the pool.

This could be tile, plaster, aggregate, or pebble where each form presents unique characteristics in as far as appearance and durability is concerned.

The final step is putting down decking or coping which borders the pool as well as gave the structure of the facility and its location to the environment.

Accessories including water jets, spas, water, water falls or lighting are provided in this developmental stage.

These features add to the pools usefulness and beauty to make it be more than just a pool, it is a luxury item.

7. Equipment Installation and Testing

The last steps include putting in place some basic equipment like filtration system, pumps, heaters and chlorination units.

Installation is very important in this case so that the pool will function correctly and with safety that is required. When built, the pool is then filled with water and all the equipment tested to ensure that they are working perfectly well.

A builder looks for water leaks, makes sure that water is circulating and has the right level of chemicals to make the water safe for swimming.

All the other features such as the automatic lid and the pool cleaner if any is added, are also checked to see if they work as required.

8. Final Inspection and Handover

Once the construction project is completed, all systems are also checked, then the Works Completion and Final Acceptance Inspection is done to check all the walls, electrical wiring, paint work, flooring, doors and windows or any other related structure and workmanship to see if they meet the standards and code requirements for habitation.

The builder gives a brief tour after showing how the pool and all the equipment should be managed.

After that, the homeowner is provided with a maintenance schedule and general guidelines on ways of taking care of the pool.

This becomes the official handover and the pool is now available for use.

9. Ongoing Maintenance and Support

Maintenance becomes something very important since after some years the pool has to be maintained regularly to meet the desired standards.

Cleaning and chemical balancing as well as checks in the equipments are some of the things that have to be done from time to time to make the pool safe for use.

Most pool builders provide services in the maintenance of the pool to ensure that it is in a good condition in the whole year.

Conclusion

The construction and development of a swimming pool are a step by step procedure to bring about an awesome pool and construction that is durable.

By discussing thus, the homeowner can be in a better position to prepare for the different stages that come with the process of having a beautiful back resort.